info@dgxinyongyuan.com         (+86)-769-88181130
You are here: Home » News » Industry News » Daily maintenance of automatic box sealing machine

Daily maintenance of automatic box sealing machine

Views: 7     Author: Site Editor     Publish Time: 2021-10-27      Origin: Site

Daily maintenance of automatic box sealing machine

First of all, the equipment maintenance of the automatic box sealing machine requires professional personnel. Equipment maintenance is a very professional work that must be carried out by professionals. In addition to solid theoretical knowledge, professionals should also have rich practical experience, be able to find equipment problems in a timely and accurate manner, and be able to make timely and effective treatments to make equipment maintenance work smoothly.


Equipment maintenance is to maintain the normal performance of the equipment and reduce machine failures. From a short-term point of view, it cannot bring obvious impetus to the improvement of production efficiency. The increase in total production requires long-term and stable equipment maintenance, so that the importance of equipment maintenance can be demonstrated. Therefore, equipment maintenance should be taken as a long-term task.


Introduction to equipment maintenance methods

1. Preventive maintenance, as the name implies, preventive maintenance is maintenance performed to prevent malfunctions. There are two basic elements. Periodic inspections of equipment for discovering the occurrence of shutdowns or other failures can be excluded in the initial stage if the above-mentioned conditions are adjusted or repaired.


2. Routine maintenance. That is, daily or weekly equipment inspection, cleaning, adjustment, lubrication, parts replacement and other activities. This is to prevent aging of the equipment, delay the aging rate, extend the service life of the equipment, and effectively reduce repair costs.


3. Improve maintenance. When equipment breaks down, in addition to repairing the equipment, the overall equipment should also be improved, such as design changes, improved materials, etc., so as to enhance the operation capacity of the equipment and bring convenience to future maintenance operations. Equipment improvement is not only necessary for maintenance, but also according to production requirements.


4. Maintenance and prevention. Equipment maintenance is not the ultimate goal, but an activity that meets the requirements of production and can maintain the utilization rate of equipment. Basically, it is hoped that the equipment performance can be improved during the design and manufacturing stage of the equipment, and the design does not require maintenance. , Or equipment that is easy to repair in the event of a failure, reducing the workload of equipment maintenance.


Detailed operation of equipment maintenance

1. The machine should be kept clean, and the rotating parts should be wiped and lubricated frequently.


2. The cam mechanism and transmission chain components should be lubricated every 15-40 working hours. It is recommended to use mechanical oil grade 50 (kinematic viscosity 47~53mm2/S50℃). Grease should be added every three months to the gear mesh. It is recommended to use calcium-based grease, grade ZG-1 or ZG-2.


3. The synchronous toothed belt and transmission belt should avoid contact with oil, so as not to reduce their service life.


4. To ensure that the cartoning machine can work normally and reliably, it should be shut down every three months to check the tension of the transmission chain and the tightness of the transmission parts, and re-adjust and tighten if necessary.


5. The filter screen of the glue machine and the filter screen of the gun seat should be cleaned regularly, and cleaned every 3-4 months in an 8-hour system. Please turn off the pressure of the glue machine before cleaning.


6. After the failure occurs, it should be carefully analyzed and repaired and eliminated by the relevant mechanics. Disassembly and disassembly are prohibited to avoid damage to the parts.


automatic box sealing machine

Leave a Message
Contact us

ABOUT US

SERVICE

CONTACT

Phone:+86-769-88181130
Adress: Er Wei Road, Dongbo Xincun Village, Zhongtang Town, Dongguan City, China.
FAX:+86 0769-88181130

Whatsapp: +86 13829143176


Copyrights  2020  Dongguan Pinchuang Automation Equipment Co.,Ltd.Technical Support: Molan Network