  (+86)-769-88181130
You are here: Home » News » Industry News » How To Maintain Rigid Box Making Machine?

How To Maintain Rigid Box Making Machine?

Views: 48     Author: Site Editor     Publish Time: 2021-03-19      Origin: Site

Regardless of whether it is a fully automatic rigid box making machine or a semi-automatic rigid box making machine, you must pay more attention to maintenance and maintenance during use. The problems of maintenance and maintenance mainly depend on the attention paid during long-term use, and should be based on the operation of the equipment. Formulate maintenance procedures, and adjust, inspect, oil, clean, etc. item by item in accordance with the regulations to ensure that the machine operates normally in the best state, thereby reducing the loss of parts and extending the service life of the equipment, so that the equipment can perform at its best. Good results. Specifically, you need to pay attention to the following aspects:

It is best to place the rigid box making machine in a place with less dust in the production workshop, and do not put it together with a dusty machine such as V Grooving Machines; the working temperature of the machine should be between -10 and 50 degrees Celsius, and the humidity should not exceed 65. %, there should not be too much dust and electric ion pollution in the surrounding air.

Pay attention to this point first: the maintenance of the rigid box making machine must be carried out by professionally trained personnel and in a shutdown state with the power turned off. At the same time, the machine should pay attention to maintaining these aspects:

1. Dust removal: To ensure the normal operation of the machine and prolong its life, the cover machine should be removed and washed periodically, and the dust, paper scraps and char on the surface of the machine should be removed with a dry brush and high-pressure air to prevent foreign objects from getting stuck;

2. Lubrication: Grease the transmission parts regularly, and check whether the pneumatic lubricant and other parts of the filter need to be added. (Specific lubrication requirements are implemented in accordance with the equipment lubrication steps.)

3. Guide rail maintenance: the nozzle seat guide rail is lifted up and wiped and filled with grease. The screw drive parts should be kept clean to prevent dust from jamming the slider while maintaining a good lubrication state to maintain a long service life; the guide rail timing belt monthly Check the tightness once.

4. Belt maintenance: First of all, always pay attention to the parallelism and tightness of the belt. If the belt is eccentric, it is easy to wear on one side; the parallelism of the belt should be adjusted frequently. Tightening and loosening the belt will cause the belt to deform and lead to the positioning of the book box production for a long time. Inaccurate, these failures to adjust will cause damage to the belt.

5. Nozzle maintenance: If the nozzle is not used for a long time, turn it on once a week, turn on the air pressure, manually open the nozzle, and spray a little glue, otherwise it will easily cause the nozzle to be blocked if it is not used for a long time.

6. When the machine is not used for a long time, it is best to clean it up and apply anti-rust oil to make it dustproof, waterproof and sunscreen.

The maintenance work of the rigid box making machine should be detailed to encourage colleagues to develop good working habits during use.

Pingchuang is a leading automatic box maker. The main products are various automatic rigid box making machines and semi-automatic rigid box making machines. Its mechanical equipment is widely used in the production and production of gift boxes, mobile phone boxes, jewelry boxes, cosmetic boxes, shoe boxes, clothing boxes, food boxes, wine boxes and other boxes.

Leave a Message
Contact us